|
|
|
||
|
|
|
|
|
Tank Turning Rolls
|
Powered Turning Rolls |
Pipe Aligning Rollers |
|
Be-co Model F-400 Standard Universal
Power Unit. Intended for both automatic and hand work, the F-400 is
equipped with a ½-horsepower AC/DC motor, a 400:1 gear ratio, and
dual-speed drive allowing either 3 to 20 or 5 to 30 inch-per-minute
rotational speed. Our Standard BE-CO units will accommodate pipe sizes
from 2" to 10 diameters with quick-connecting expansion
chains. New
Be-co NEW Model F-600 Heavy Duty Universal Power Unit. A heavy duty power unit with greater turning force for larger tank rotation This unit is identical to the Model F-400 standard power unit, but with a 600:1 gear ratio providing a choice of 2 to 13 1/3 or 3 1/3 to 20 ipm rotational speed.New. PRO TR1500 New Profax 1,500 lb Turning Rolls. 1,500 lb Turning Capacity (750 lb Max Set Down Weight for each the Drive and Idler). 1-1/2 to 16 Diameter Capacity. Variable Speed from 0.0 to 140 IPM. 10 Diameter x 2 Wide Rubber Wheels. High Frequency Protected. 115 Volt.Brand New Ready to Ship !! WPI TRD2000/WRI2000 "NEW" Weld Plus #2000 Turning Rolls. Drive Roll & Idler each have a capacity of 2000 lbs. For diameters from ½ to 40. 10 dia. wheels, High Frequency Protection, Variable Speed Control. With Foot Switch. 115 volt NEW GEN TR0100 NEW Gentec Model TR-0100 2,200 lb Turning Roll Set. 2,200 lb total weight capacity. 1 to 31 diameter capacity. Variable speed from 3.5 to 63 IPM. 2 wide x 8 diameter polyurethane wheels. High frequency protected. 115 volt. NEW in Stock!! Ready to Ship !! PAN PIPER 3 NEW Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, Add an Additional Idler for a Total Capacity of 6,000 lb. 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Drive and 1 ea. Idler. Pendant Control. NEW !! WPI T6/I6 "NEW" Weld Plus #6000 Turning Rolls. 6000 lb Capacity Set Includes: 1 Drive Roll & 1 Idler Roll. Each Axle Has Double 10 X 2 Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3 to 72 via 3 Ctr. 115 volt. Ship Wt. 490 lbs/set.NEW WPI T9D 8 "NEW" Weld Plus #6000 Turning Rolls. 6000 lb Capacity (Add an additional idler for a total capacity of 9,000 lb.). Set Includes: 1 Drive Roll & 1 Idler Roll. Dual Driven Power Unit. Each Axle Has Double 10 X 2 Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3 to 96 via 4 Ctr. 115 volt. Ship Wt. 580 lbs/set. NEW WEB T-18/I-18 NEW 12,000 lb Turning Rolls. Set Includes 1 T-18 Driver and 1 I-18 Idler (add extra Idler for 18,000 lb Capacity). 12 Diameter Rubber Wheels, 2 Wheels per Axle for 7 Total Wheel Face. For Diameters from 12 to 12. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New Ready to Ship! PAN TANKER 150/75 NEW Pandjiris 15,000 lb Tanker Turning Roll Set. 15,000 lb weight capacity. 3.5 to 12 diameter capacity. Variable speed from 2.9 to 72 IPM. 25 pendant control. 115 volt. No wheel adjustments to be made for the full range of diameters and Tankers maintain a constant center line !! NEW in Stock!! Ready to Ship !! WEB T-24/I-24 NEW 16,000 lb Turning Rolls. Set Includes 1 T-24 Driver and 1 I-24 Idler (add extra Idler for 24,000 lb Capacity). 12 Diameter Rubber Wheels, 3 Wheels per Axle for 10.5 Total Wheel Face. For Diameters from 12 to 16. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New Ready to Ship! WEB T-30/I-30 "NEW" Webb 20,000 lb Turning Rolls. Set Includes 1 T-30 Driver and 1 I-30 Idler (add extra Idler for 30,000 lb Capacity). 12" Diameter Rubber Wheels, 4 Wheels per Axle for 14" Total Wheel Face. For Diameters from 12" to 16'. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New Ready to Ship! PRE TRDA 20HD NEW Preston-Eastin TDRA-20HD Drive Roll. 40,000 lb capacity when paired with TIRA-20HD idler, 60,000 lb capacity when paired with 2 each TIRA-20HD idlers. 6 to 14 diameter capacity. Variable speed from 1.9 to 57 IPM. 30 Remote pendant control. 230/460 volt. Drive Unit Only !! NEW IN STOCK !! Used Idler Unit Available from Stock !!! WEB R-500/I-500 NEW Webb 40,000 lb Turning Rolls. Set Includes 1 R-500 Drive and 1 I-500 Idler (add extra Idler for 60,000 lb Capacity). 18 Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7. For Diameters from 6 to 15. Variable Speed from 7 to 58 IPM. With Remote Pendant Control. 230/460 Volt. Brand New Ready to Ship! ARO WRD-20/WRI-20 "NEW"
Koike-Aronson 20 Ton Turning Rolls. Capacity: 1 Drive, 1 Idler 20
Tons. Add 1ea additional Idler (not included) Cap. 30 Tons.
Three (3) 12 dia. X 4 Rubber Wheels per axle with Overload Disc.
Variable Speed of 2 to 50 IPM surface speed.. For work diameters
from 6 to 13 ft. Remote Pendant Control. Input Power 460 volt 1
phase. NEW!!! - IN STOCK - Drive and Idler PAN MM30/15 NEW Pandjiris Missouri Mule 30/15 Turning Rolls. Drive and Idler. 60,000 lb Weight Capacity. 12 to 16 Diameter Capacity. Variable Speed from 5.3 to 53 IPM. 20 Diameter x 10 Wide Rubber Wheels. Pendant Control. 460 Volt. NEW WEB R-1000/I-1000 NEW 66,000 lb Turning Rolls. Set Includes: 1 ea R-1000 Driver, 1 ea R-1000 Idler (add extra idler for 100,000 lb capacity). Rubber Wheel diameter 18 with 2 Wheels per axle for a Total Wheel face of 14. For Diameters from 6" to 20'. Variable Speed fro 7 to 58 IPM. With Remote Pendant Control. 1 year warranty. Brand New Ready to Ship! T102214 NEW Webb R-1500, 100,000 lb Turning Rolls. Set Includes: 1 ea R-1500 Driver, 1 ea R- 1500 Idler (add extra idler for 150,000 lb capacity). Rubber Wheel diameter 18 with 3 Wheels per axle for a Total Wheel face of 21. For Diameters from 6" to 22'. Variable Speed from 7 to 56 IPM. With Remote Pendant Control. 1 year warranty. Brand New Ready to Ship! RAN Koike Ransome NEW 100 Ton MICARTA Turbine Rotor Turning Rolls. Model 100 PRM Power Roll, Model 50IRM Idler Roll. Micarta Rolls are 22 diameter X 8 wide Micarta Surface. Roller Center Line Distance 23, For Shaft diameters from 8 to 32, 3 HP AC Inverter Drive, Variable Surface Speed of Roller from 1.5 to 60 IPM. Pendant Control w/40 of Control Cable with Forward, Stop, Reverse, 10 Turn Pot. Speed Control and Rapid Traverse. Input Power Required 460 volts, 60 Hz. 3 phase. New in our Stock! Rental (min 2 months). PRE Preston-Eastin NEW TDRA/TIRA-120, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20 dia. x 8 wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8 to 18 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control 460 volt input. New in our Stock! PRE Preston-Eastin NEW TDRA/TIRA-120-22D, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20 dia. x 8 wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8 to 22 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control. 460 volt input. New in our Stock! Optional Extra TIRA-120 Idler. PAN PR180/60 NEW Pandjiris Model PR-180/60 Turning Rolls. Drive and Idler. 120,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 180,000 lb). 12 to 21 Diameter Capacity. Variable Speed from 3.0 to 75 IPM. 20 Diameter x 15 Wide Rubber Wheels. Pendant Control. 460 Volt. NEW PAN PR270/90 NEW Pandjiris Model PR-270/90 Turning Rolls. Drive and Idler. 180,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 270,000 lb). 12 to 21 Diameter Capacity. Variable Speed from 5.6 to 55.7 IPM. 20 Diameter x 20 Wide Rubber Wheels. Pendant Control. 460 Volt. NEW T309002 Kistler / Pandjiris Model U-150 / U-150H Pipe Rotator with Clamping Roller System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Good Condition. T603002 Ransome PTR Pipe Support Stand. 1,000 lb Weight Capacity. 2 to 36 Diameter Capacity. 8 Diameter x 2 Wide Steel Wheels. 8 Height Adjustment from 24 to 32. Serial #2918044 Good Condition. T612012 Pandjiris Model OS-15 Pipe Support Stand. 1,500 lb Capacity. 2 to 24 Diameter Capacity. Manual Adjustable Height. Serial #800-9138-1 Good Condition. T701005 Pandjiris Piper 3 Turning Rolls. 4,000 lb load capacity, 3-1/2" to 40" diameter capacity. Variable speed from 2.0 to 60 IPM. Drive and idler. 2-1/2" wide X 12" diameter steel wheels on both the drive and idler. Pendant Control. Serial #N/A Good Condition. T610008 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Steel Wheels on the Powered Unit, Rubber on the Idler Unit. Pendant Control. Serial #N/A Good Condition. T505005 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good Condition. Additional Idlers Available !! T505006 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good Condition Additional Idlers Available !! T505007 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good Condition. Additional Idlers Available !! |
T505008 Pandjiris Piper 3 Turning
Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter
Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler.
2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control.
Serial #N/A Good Condition. Additional Idlers Available !!
T605003 Worthington Ranger 3 Pipe Turning Rolls. 4,000 lb Capacity. 3.5 to 40 Diameter Capacity. Travel Speed from .9 to 37.7 IPM. 3 Wide x 12 Diameter Rubber Wheels. Drive & Idler. Pendant Control. 120 Volt. Serial #N/A Good Condition. T411004 RMS 3,000 lb Unit Frame Tilting Turning Rolls. 3,000 lb Weight Capacity. 3 to 60 Diameter Capacity. Pedestal Mounted Variable Speed Controls. 6 to 40 Drive to Idler Spacing in 2 Increments. Manual Tilt Frame from 0 to 45 Degrees in 5 Degree Increments. On/Off Foot Pedal. 115 Volt. Serial #N/A Good Condition. P410004 Ferguson 16/2-F475-270 Pipe Rotator with Clamping Roller System. 3,000 lb Load Capacity. 3 to 20 Diameter Capacity. Variable Speed Pipe Rotation by a Set of 12 Diameter Steel Wheel Turning Rolls with a Hold Down Devise. Turning Rolls are Mounted on a Constant Speed Side Arm Table that has 360 Degree Power Rotation. A Unique System for Welding Off Set Pipe and Pipe Elbows in Any Position. Serial #61418 Good Condition. T405001 Radian 3,000 lb Turning Rolls. Drive Roll with Idler. 3,000 lb Total Weight Capacity. 16" Diameter x 4" Wide Rubber Tires. Overload Discs. Constant Speed Friction Drive Rotation. 4" Minimum to 36" Maximum Diameter Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition. T405002 Radian 3,000 lb Turning
Rolls. Same As Above. Electrical Re-Conditioned - No Clean Up or Paint Good
Condition. T708014 Weldwire Model WWRD-2 4,000 lb Turning Rolls. 4,000 lb capacity for 1 drive and 1 idler. 3.5 to 40 diameter capacity. 12 diameter x 3 wide rubber wheels. Pendant control. 120 volt. Serial #9439/9471 Good Condition. T711010 Aronson WRI-5 5,000 lb Idler Roll. 5,000 lb weight capacity. 6 to 12 diameter capacity. Idler Only !! Serial #n/a Good Condition. T711011 Aronson WRI-5 5,000 lb Idler Roll. 5,000 lb weight capacity. 6 to 12 diameter capacity. Idler Only !! Serial #n/a Good Condition. T405003 Radian 5,000 lb Turning Rolls. Drive Roll with Idler. 5,000 lb Total Weight Capacity. 16" Diameter x 1" Wide Steel Wheels. Overload Discs. Constant Speed Chain Drive Rotation. 4" Minimum to 36" Maximum Diameter Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition. T405004 Radian 5,000 lb Turning Rolls. Same as Above.Electrical Re-Conditioned - No Clean Up or Paint Good Condition. T409003 Ransome/Worthington AIRR Idler Roll. 5,000 lb Weight Capacity. 5 to 12 Diameter Capacity. 2-1/2 Wide x 16 Diameter Rubber Wheels. Good Condition. T409004 Ransome/Worthington AIRR Idler Roll. 5,000 lb Weight Capacity. 5 to 12 Diameter Capacity. 2-1/2 Wide x 16 Diameter Rubber Wheels. Good Condition. T10805 Teledyne-Readco TRR-50, 5000 lb Steel Wheel Turning Rolls. Variable Speed ½ HP, 115 volt, Pendant Control of 2.5 to 75 IPM. 9 diameter x 4 wide Steel Wheels. For diameters from 3 to 66. Now set in unitized frame. 1980 Ser. #S-84563. Good Cond. T204001 Aronson T1I 6,000 Idler Roll. 6,000 lb Capacity. 24" Diameter x 3" wide Rubber Wheels. 4' Minimum Capacity, 10' Maximum Diameter Capacity. Idler Only. Serial #6049 Good Condition. T711009 Web Model T-18 Powered Turning Roll Only. 18,000 lb turning capacity, 6,000 lb support capacity. 12 to 12 diameter capacity. 12 diameter x 7 wide rubber wheels. Variable speed reeves drive. On/off pendant control. 230/460 volt. Powered roll only. Serial #n/a Good Condition. T405007 Radian 10,000 lb Turning
Rolls. Drive Roll and Idler. 10,000 lb Total Weight Capacity. 16"
Diameter x 3.5" Wide Rubber Wheels. Constant Speed Rotation.
4" Minimum to 144" Maximum Capacity. 230/460 Volt.
Electrical Re-Conditioned - No Clean Up or Paint Good Condition. T707002 Ransome Model APRR 5 Ton Turning Rolls. 10,000 lb weight capacity. 5 to 48 diameter capacity. Variable speed travel from 6.4 to 61 IPM. 16 diameter x 2.5 wide rubber wheels. Pendant control. Serial #3330805 Good Condition. T508003 Worthington A 10,000 lb Turning Rolls. 10,000 lb Weight Capacity.5 to 72 Diameter Capacity. Variable Speed Rotation from 6.1 to 61 IPM by a Sheave Drive. 16 Diameter x 3 Wide Rubber Wheels. On/Off Pendant. 230/460Volt. Drive and Idler. Serial #N/AAs-Is T508004 Worthington A 10,000 lb Turning Rolls. 10,000 lb Weight Capacity.5 to 12 Diameter Capacity. Variable Speed Rotation from 6.1 to 61 IPM by a Sheave Drive. 16 Diameter x 3 Wide Rubber Wheels. On/Off Pendant. 230/460Volt. Drive and Idler. Serial #N/AAs-Is Only T703004 WEB T-18/I-18 12,000 lb
Turning Rolls. Set Includes 1 T-18 Driver and 1 I-18. 12 Diameter
Rubber Wheels, 2 Wheels per Axle for 7 Total Wheel Face. For
Diameters from 12 to 12. Variable Speed Reeves Drive from 0 to
45 IPM. With On/Off Pendant Control. 230/460 Volt. Good Condition. T704013 Aronson Model WRD-20 20,000 lb Drive Roll Only. 20,000 lb weight capacity. 60,000 lb turning capacity. 6 to 13 Diameter capacity. 12 diameter x 13-3/8 rubber wheels. Variable speed from 2.0 to 50 IPM. Serial #83440 Good Condition. T209006 Aronson WRD-10/WRI-10 10 Ton Turning Rolls. 20,000 lb weight capacity. 6 to 13 diameter capacity. Variable speed travel from 2 to 50 IPM. 12 diameter x 4 wide rubber wheels with over load discs. Drive & Idler. Serial #63132 Good Condition. T510016 Irco 10T-PR 10 Ton Turning Rolls. 20,000 lb Capacity, 12 to 60 Diameter Capacity. 19 Diameter x 4 Wide Rubber Wheels. Variable Speed Drive. Pendant Control. 230/460 Volt. Serial #5203 Good Condition. T507003I Preston-Eastin TIRA-20HD Idler Roll. 20,000 lb weight capacity. 6 to 14 Diameter capacity. 7 wide x 14-1/4 diameter rubber wheels with over load discs. Good Condition. New Drive Unit Available from stock !! T508001 Worthington AA 20,000 lb Turning Rolls. 20,000 lb Weight Capacity.12 to 20 Diameter Capacity. Variable Speed Rotation from 1.48 to 58 IPM by a Sheave Drive. 24 Diameter x 4 Wide Rubber Wheels. On/Off Pendant. 230/460Volt. Drive and Idler. Serial #N/A As-Is" TSP10802P Pandjiris MM-15T-SPL Rotation System for Ultrasonic Testing. This is a U.T. Rotation System for Digitally Indicated, Variable Speed, Turning of Cylindrical Parts under fluids flow. The System uses the Missouri Mule 15 Ton Turning Roll Configuration, Specially Manufactured for this type of Testing. The Drive Wheels are 16 dia. Grooved, Hardened Steel which are can be pivoted up and down for various workpiece diameters. The Idler Wheels are 6 Grooved, Hardened Steel , and have 13 of Motorized Powered Adjustable Height. There are Vertical Thrust Rolls on both driver and idler to prevent unwanted walking. The Driver and Idler separation is adjustable for lengths from 24 to 100 by a long hand wheel screw. The whole system is in a fluid collection pan. Ser. #673-862 Very Good Condition! TSP10801P Pandjiris MM-30T-SPL Rotation System for Ultrasonic Testing. This is a 1994 U.T. Rotation System for Digitally Indicated, Variable Speed, Turning of Cylindrical Parts under fluids flow. The System uses the Missouri Mule 30 Ton Turning Roll Configuration, Specially Manufactured for this type of Testing. The Drive Wheels are 20 dia. Grooved, Hardened Steel which are can be pivoted up and down for various workpiece diameters. The Idler Wheels are 6 Grooved, Hardened Steel , and have 14 of Motorized Powered Adjustable Height. There are Vertical Thrust Rolls on both driver and idler to prevent unwanted walking. The Driver and Idler separation is adjustable for lengths from 30 to 120 by a long hand wheel screw. The whole system is in a fluid collection pan fitted with removable platform slat sections. Ser. #SO. 60-4604 This is a Ready to Ship Rotation System in Excellent Condition! T704008 Aronson Model WRD-30 30,000 lb Drive Roll Only. 30,000 lb weight capacity. 90,000 lb turning capacity. 8 to 18 diameter capacity. Variable speed from 1.4 to 40 IPM. 20 diameter x 7 wide rubber wheels with overload discs. 240/460 volt. Serial #N/A Good Condition. T704011/012 Reed 30,000 lb Idler Roll. 30,000 lb weight capacity. 24 to 14 diameter capacity. 22 diameter x 14 wide rubber wheels. Center of the axel is 19 from the floor. Good Condition. T711001 Unique Readco 16 Ton Turning Rolls. 32,000 lb weight capacity. 6 to 12 diameter capacity. Variable Speed Reeves Drive. Dual 12 diameter x 4 wide rubber wheels. Drive & Idler. 460 volt. Serial #n/a Good Condition. T605019 Teledyne-Readco 150 Ton Turbine Rolls. 150 Ton Weight Capacity. 4 to 48 Diameter Capacity. Variable Speed Electric/Hydraulic Drive. 23-1/2 Diameter x 16 Wide Rubber Wheels. Drive and Idler. Serial #105839/105840 Very Good Condition. T008002P Aronson 200 Ton Twin Driver Turning Rolls. Model WSD-200-S2G. 3 to 10 diameter capacity. Twin Driver Turning Rolls use one Driven Wheel on each Roll Stand. Also one of these driven wheels has Two Final Gear Drive Worm Gears on each side of the axle, thus the two pinions work in opposite directions to Eliminate Backlash. This Design was developed by Aronson for Babcock & Wilcox so the turning rolls could be used under Vertical Boring Mills. Ser.# 667 Good Condition. |
Used Welding Positioners
Contact
We accept VISA, Master Card and American Express
Web Site Inventory Links Page
Welding Positioners | Welding Manipulators | Seam Welders | Tank Turning Rolls | Turntables
Headstock Tailstocks | Cutting Machines | Robotic Equipment | Miscellaneous Used Welding Equipment
Products Page | Welding Side Beams | Used Welders | E-Mail | Links Page | Welding Rotators | Site Map
sales@usedweldingpositioners.com
