Inventory Links Site Map

Longitudinal Welding Seamers  


New and used, seam welders, weld seamers, seam welder,
longitudinal and circumferential welding seamers. Manufactures such as Jetline, Pandjiris, Four Corp and Airline 

Updated May 2008

Seam Welders

  

Used Seam Welder
JET LWS36 “NEW” Jetline Model LWS-36 36” Longitudinal GTAW seam Welding Package. 42” Total Clamping/Welding Length. Minimum Part Diameter Capacity of 3.25”. Maximum Part Diameter Capacity of 32” (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 350 Tig Welding Package that Includes a Water Circulator and 500 amp Tig Torch. Brand New.

JET LWS48 “NEW” Jetline Model LWS-48 48” Longitudinal GTAW seam Welding Package. 54” Total Clamping/Welding Length. Minimum Part Diameter Capacity of 3.25”. Maximum Part Diameter Capacity of 32” (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 350 Tig Welding Package that Includes a Water Circulator and 500 amp Tig Torch.Brand New.

JET LWS60 “NEW” Jetline Model LWS-60 60” Longitudinal GTAW seam Welding Package. 66” Total Clamping/Welding Length. Minimum Part Diameter Capacity of 5.25”. Maximum Part Diameter Capacity of 32” (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 350 Tig Welding Package that Includes a Water Circulator and 500 amp Tig Torch. Brand New.

JET LWS72 “NEW” Jetline Model LWS-72 72” Longitudinal GTAW seam Welding Package. 78” Total Clamping/Welding Length. Minimum Part Diameter Capacity of 6.0”. Maximum Part Diameter Capacity of 32” (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9027 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 350 Tig Welding Package with a Water Circulator and 500 amp Tig Torch. Brand New.

JET LWS72G “New” Jetline Model LWS-72 72” Longitudinal Seam Welding Package. 78” Total Clamping/Welding Length. Minimum Part Diameter of 6.0”. Maximum Part Diameter Capacity of 32” (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control. Ready to Mount Your Welding Process !! Brand New.

1 ea GEN LS12 "NEW" Gentec Model LS-12 4’ Longitudinal Seam Welder. 51" Total Welding/Clamping Length Capacity. .040 to 3/8" Thickness Capacity. 4" Minimum Part Diameter. 30" Maximum Part Diameter. Variable Speed Rack & Piniod Driven Carriage from 1.2 to 29 IPM. Pneumatic Torch Lifter. Automatic Gas Purge System. Automatic Pneumatic Mandrel Clamping Devise. Pneumatic Plate Alignment Devise. Automatic Finger Release. Copper Gas Purge Back-up Bar. Welding Equipment NOT Included. NEW IN STOCK !! Ready to Mount Your Welding Process

Used Reconditioned Seamers

S209001 Jetline 6" Custom Weld Seamer. 1997 Variable Speed Jetline Carriage on a Jetline Model TKS-24 Side Beam with 24" Travel. Currently Has a Total Clamping Length of  6" (Can be Increased with a New Clamping Fixture to a Length of 24" to Match Side Beam). 3" Vertical and Horizontal Cross Slides and a Rotary Slide. No Welding Equipment!! Serial #970295 Good Condition.

S209003 Jetline 6" Custom Weld Seamer. 1997 Variable Speed Jetline Carriage on a Jetline Model TKS-24 Side Beam with 24" Travel. Currently Has a Total Clamping Length of  6" (Can be Increased with a New Clamping Fixture to a Length of 24" to Match Side Beam). 3" Vertical and Horizontal Cross Slides and a Rotary Slide. Complete with Plasmfix 50S Plasma Welding Power Supply and Miller Water Circulator. Serial #970299 Good Condition.

S604011 “1990”Mills Machine 11” Longitudinal Plasma Seam Welder. 11” Overall Welding / Clamping Length Capacity. 3-1/2” to 5-1/2” Diameter Capacity ( Can be Increased with a Riser ). Variable Speed Screw Driven Carriage. 3” Pneumatic Torch Lifter. Gas Purge Back p Bar, Water Cooled Mandrel, Dual Water Circulators.  Plasma Welding Equipment Includes a Thermal Dynamics WC100B Welding Console, Airco Heliwelder Power Supply and Multi Slope 2 Sequence Control, Model 3A Plasma Torch and a Cyclomatic 80A Magnetic Welds Oscillator. Serial # N/A Good Condition.

S502007 Jetline 12” Coil End Joining Seam Welder. This seam welder’s primary use is to join together strips fed from coils. The Jetline Seamer Clanping/Welding bed is 12-1/2” long. Has a Variable Speed Carraige with #9026 Control and two manual cross slides on the torch holder. The one piece hold down clamps are air actuated with individual air valves. There are 2 ea  8” dia. primary strip guide rolls and 2 ea 3” final guide rolls. The Welding Package is a Miller 50A Precision Tig Welding  Power Supply and and Air-Cooled Tig Torch for the fusion only weld. The whole system is mounted on a self contained portable base. Dimensions of the whole system are 78” lg. x  40” w x 58” h. Jetline Ser. 84166.            Very Good Condition.

S412001 Cecil Peck “Dual Position” Outside Corner Seam Welder. This Machine was Used to Tig Weld the Outside Corners of Aluminum, Steel and Stainless Electric Panel Boxes. The Dual Operator Positions were Used for Weld Lengths up to 17” Long. The Air Clamping Device and Copper Mandrel Plates Could be Increased (Within Reason) for Longer Welds. The Torch Carriers are Heavy Duty Variable Speed Devices that are ½ H.P. Dc Motors & Drives.

S505002 Pandjiris Model 24E-3-5-30 24” Weld Seamer. 30” Total Clamping / Welding Length. 3-1/4” Minimum Parts Diameter, 32” Maximum Parts Diameter ( Can be Increased with a Riser ). Rack and Pinion Drive Variable Speed Carriage. Water Cooled Mandrel. Plate Alignment Devices. Jetline Model 9029 Cold Wire Feeder and Model 9033 Pulse Control. Power Supply NOT Included. Serial #400-9364.     Good Condition.

S10302 Jetline LWS-24Z, High Production , Automatic Seamwelder. This 1996 Automatic Plasma Welding Seamwelder is a High Production Machine that Features: Automatic Clamping & Alignment for Cylinders up to 24” long , 18” to 25” in diameter, and .020 to .187 Thickness, Microprocessor Control, Thermal Arc Ultima 150 Plasma Welding System, Safety Palm Buttons & Guards, and More! Minimum Operator Skill Required,  This machine was used for a short run product.  Very Low Hours, Excellent Condition.

S701001 Jetline Model LWS-24 24” Seam Welder. 30” total welding/clamping length capacity. 2-1/2” minimum part diameter. 32” maximum part diameter (can be increased with a riser). Gas purge back up bar. Variable speed rack & pinion driven carriage with a model #9027 carriage control. Welding equipment NOT included. Serial #81308      Good Condition.

 
S501001 Jetline LWX-36 “Ultra Precision” Longitudinal Seam Welder. 42” Total Welding/Clamping Length. Minimum Part Diameter Capacity of 3.25”, Maximum Part Diameter Capacity of 32” (Can be Increased with a Riser). Welds Material from .005 to 3/8” Thick. Gas Purge Back-up Bar. Continuous Copper Hold Down Fingers. Welding Equipment NOT Included. Serial #7571 Good Condition.

S705005 Jetline LWS-36 36” Longitudinal Seam Welder. 42” total welding / clamping length. Minimum part diameter capacity of 4.5”, Maximum part diameter capacity of 32” (can be increased with a riser). Welds material from .020 to 3/8” thick. Gas purge back-up bar. Water cooled mandrel. Welding equipment NOT included. Serial #7991    Good Condition.

S612013 Pandjiris Model 36ES-30 36” Seam Welder. 42” Welding/Clamping Length Capacity. 3” Minimum Part Diameter. 30” Maximum Part Diameter ( Can be Increased with a Riser ). Variable Speed Rack and Pinion Driven Carriage. Water Cooled Mandrel. 6” Manual Cross Slides. Serial #400-8078 Good Condition.

S608005 Hamilton Custom 48” Weld Seamer. 52”  Welding/Clamping Length. 6” Minimum Part Diameter. 58” Maximum Part Diameter Capacity. Air Clamping. Side Beam, Carriage and Welding Equipment NOT Included.  “AS IS” Condition.

S702011 Airline/Jetline LWS-48 Seam Welder. 54” total welding/clamping length capacity. 4”  minimum part diameter, 32” maximum part diameter (can be increased with a riser). Rack and pioniod driven variable speed carriage. Welding equipment NOT included. Serial #1360 Good Condition.

S708003 Berkeley-Davis Model S-2 5’ Weld Seamer. 60” total welding/clamping length capacity. 12” minimum part diameter. 72” maximum diameter. Rack & pinion driven variable speed carriage. Water cooled mandrel. 6” manual vertical and horizontal slides. Welding equipment NOT included. Serial #672548  Good Condition.

S512003 Webb Model J-68 5’ Seam Welder. 68” total Welding/Clamping Length. 6” Diameter Minimum Capacity. 32” Diameter Maximum Capacity.  .020 to .135 Thickness Capacity. Water Cooled Mandrel. Includes a Lincoln TC-3 Variable Speed Travel Carriage, Lincoln NA-5 or NA-3 Control and Head, Lincoln Vertical and Horizontal Adjusters and Lincoln DC-600 Power Supply. 4” Individual Copper Fingers, Copper Back-up Bar. Serial #59115
Good Condition .

S707003P Jetline Model LWP-72 6’ Precision  Longitudinal Seam Welder. 78” total welding / clamping length capacity. Thickness capacity from .005” to 3/8”. 5” minimum diameter capacity. 32” maximum diameter capacity (can be increased with a riser.). Variable speed rack and pinion drive carriage from 1.2 to 60 IPM. Equipped with retractable edge alignment device, water cooled mandrel, gas purge back-up bar, AFS-2A-4 automatic finger stop system, ALC-101V6T arc length control, CWF-10A cold wire feeder, 6” cross seam adjuster, wire IPM meter and carriage travel IPM meter. Welding equipment NOT included. Serial #920083 Will be fully reconditioned!!

S803016 Jetline Model LWS-72 6’ Seam Welder. 78” total welding/clamping length capacity. 6” minimum diameter capacity. 32” maximum diameter capacity (can be increased with a riser). Jetline model SWC-3B variable speed rack and pinion driven carriage. Plate alignment devices. 2” vertical and horizontal slides. Air torch lifter. Jetline CWF-10A cold wire feeder. Gas purge back up bar. Serial #81464 Good Condition.

S609006 Pandjiris Model 72-ES-52 72” Seamer. 74” Total Welding / Clamping Length. 4” Minimum Part Diameter. 48” Maximum Part Diameter. Equipped with a Variable Speed Model OM-48 Carriage, Vertical and Horizontal Adjusters. Air Actuated Torch Lifter. Spatter Shields. Water Cooled Mandrel. Serial #25-1969. Welding Equipment NOT Included !! Very Good Condition.

S611019P Pandjiris Model #572 72” Weld Seamer. 78” Welding/Clamping Length Capacity. 5” Minimum Part Diameter. 32” Maximum Part Diameter ( Can be Increased with a Riser ). Variable Speed Rack and Pinion Driven Carriage. Serial #25-1046 Good Condition.

S612002P Pandjiris Model #72E6-36 72” Weld Seamer. 78” Welding/Clamping Length Capacity. 5” Minimum Part Diameter. 36” Maximum Part Diameter ( Can be Increased with a Riser ). Variable Speed Rack and Pinion Driven Carriage. Water Cooled Mandrel. Gas Purge Back up Bar. Serial #400-9160 Good Condition.

S505001 Pandjiris Model 72-ES-52 72” Seamer. 78” Total Welding / Clamping Length. 6” Minimum Part Diameter. 52” Maximum Part Diameter (Currently has an 18” High Riser that can be Removed). Equipped with a Variable Speed Carriage, Air Clamping Mandrel, Cable Track and 4” Powered Vertical and Horizontal Cross Slides. Welding Equipment NOT Included !! Serial # N/A     Good Condition.

S311001P Pandjiris 8 ft "Powered Elevation" Longitudinal Seamer. 102" of Welding Length which Includes 3" Run-Off Each End. 5' of Powered Elevation Bed Height from 35" to 95" by a Screw Driven Carriage. 7" Diameter Mandrel. A Complete System that Includes a Jetline #9027 Carriage Control, #9028 Weld Sequence Control, # 9029 Cold Wire Feeder, a Cyclomatic AVC-3 Arc Length Control with a 6" Motorized Slide and a 6" Manual Horizontal Slide. Pendant Control for Up/Down and Clamp/Un-clamp Functions. Serial #25-3159 Very Good Condition.

S704003 Pandjiris Model 120-1/50-FS 10’ Internal / Flat Sheet Seamer. 120” welding/clamping length. .020 to 3/8” clamping range. For flat sheet or I.D. welding on cylinders with a 50” minimum I.D.. Linde model OM-48 variable speed travel carriage. 16.5” mandrel height. 6” wide Pandjiris 4-bar linkage clamp finger arrangement (provides more clamping pressure and inward surge than standard fingers). Gas purge back-up bar. 6” manual cross slides.
Welding equipment NOT included. Serial #25-3677  Good Condition.

S207001 Gouran 12 Ft. External or Flat Sheet Longitudinal Sub-Arc Seamer. 144" Total
Welding Length. Was used for Welding of Flat Sheet. Can be Used as an External Seamer for Cylinders with a Minimum Dia. of 20". Currently a Maximum Dia. of 36" but can be Increased with a Riser. Linde Rack and Pinion Drive Carriage and Control. Water Cooled Mandrel with Bernard Water Circulator.  As Is - Good Operating Condition.

S710001P Pandjiris Model 336FS  28’ Combination Internal / Flat Sheet Seamer. 28’ total welding/ clamping length capacity. .020 to 3/8” thickness capacity. 34” working height. Can do internal weld on cylinders from 60” and up. Pandjiris model VCS-15-3 variable speed rack and pinion driven carriage. Currently equipped with the following welding equipment: Jetline ALC-201 arc length controller, Jetline model CWF-10A cold wire feeder, Miller Gold Star 652 600 amp DC power supply, Miller HF20-1WG high frequency arc starter, Miller Coolmate 4 water circulator and Weldcraft 500 amp machine tig torch. Serial #10348X09-6 With Current Welding Equipment - Very Good Condition.

Used Welding Positioners
  Contact


We accept VISA, Master Card and American Express

 

Web Site Inventory Links Page
Welding Positioners | Welding Manipulators | Seam Welders | Tank Turning Rolls | Turntables
Headstock Tailstocks | Cutting Machines | Robotic Equipment | Miscellaneous Used Welding Equipment
Products Page | Welding Side Beams | Used Welders | E-Mail | Links Page | Welding Rotators | Site Map


sales@usedweldingpositioners.com