Inventory Links Site Map

Used Welding Head Manipulator
Sub Arc Weld Manipulator Gantry Welder Arm  


Sub Arc Weld Manipulators
Cantilevered Welding Boom and Column  

Column Booms Weld Manipulators

 

Welding Head Manipulators

8 ea M610004 Positech Model “G” Simple Air Manipulator. Positech Model G SAM Parts Manipulator uses Pneumatic Power to Provide Quick Response and Superior Maneuverability with Loads up to 370 lbs. Vertical Lift from 44.7” to 87.3”. Reach from 66” to 126”. 360 Degree Full Rotation. Includes Portable Base with Fork Truck Lifting Slots. Good Condition

1 ea M806001 Roller & Assoc. Head Director Manipulator on Manual Travel Car. Adjustable height from 49” to 112” by a manual hand pump hydraulic cylinder. Reach 71” when at 49”, 43” reach when at 112” and 74” reach with the arm level. 360 degree manual mast rotation. 4” manual cross slides mounted on the end of the boom arm. All mounted on a manual travel car. Serial #n/a Good Condition 

1 ea M409001 Porta Tools / Lincoln Model H-600 26” x 48” Manipulator. Constant Speed Power Reach from 24” to 50”, Screw Driven Constant Power Elevation from 12” to 60”. Lincoln DC-600 Power Supply and a NA-5 Submerged Arc Control and Head, Lincoln Manual Horizontal and Vertical Adjusters. All Mounted on a Variable Speed Travel Car with 40’ of Track. Serial #W7702-0270 Good Condition

1 ea M606017 Ransome Model 44 4’ x 4’ Manipulator / Travel Car. 4’ Constant Speed Powered Lift from 25” to 73”. Manual Reach from 9” to 57” from the Center of Mast Rotation. Manual King Pin Base. Manual Travel Car. 115 Volt. Serial #0526806 Good Condition

1 ea M901023P Pandjiris 4’ x 37’ Telescoping Boom Manipulator. 191” overall height. 48” constant speed powered elevation from 57-3/4” to 105-3/4” to the centerline of the arm. 3 to 116 IPM variable speed powered reach telescoping boom with a total reach of 37’6”. Fixed non swivel bolt down base. 460 volt. Serial #60-4596 Good Condition

1 ea M911003 Aronson G6VRA6CL-PK 6’ x 6‘ Locust “I” Manipulator. 400 lb weight capacity either or both ends. 6’ constant speed powered lift from 29.5” to 101.5”.13” to 85” variable speed reach from 3.3 to 100 IPM. 360 degree manual mast rotation. Portable “X” frame base. Currently equipped with the following: 180 degree manual X and Y axis swivels on the welding head, Jetline ALC-101V-6T arc length control, Jetline CWF-10A cold wire feeder, Cyclomatic 80A magnetic arc oscillator, horizontal powered cross slide, 500 amp water cooled machine tig torch and a Miller Maxstar 300DX Tigrunner Package.115 volt. Serial #80430 Very Good Condition

1 ea M100404 Aronson G6VRA6CL-PK 6’ x 6’ Manipulator. 400 lb load capacity either or both ends. 6’ constant speed powered elevation from 29.5” to 101.5”. 3.3 to 100 IPM variable speed reach from 13” to 85” from the center of the mast rotation. 360 degree manual mast rotation on a portable “X” frame base. 230 or 460 volt. Serial #97558 Good Condition

1 ea M903004 Preston-Eastin MA-66MD 6’ x 6’ Manipulator. 150 lb weight capacity either or both ends. 6’ powered lift from 24-1/4” to 96-1/4”. 6’ 4.0 to 100 IPM variable speed powered reach from 18-1/2” to 90-1/2”. 360 degree manual mast rotation. Bolt down base. 115 volt. Serial #MB66MD-27 Good Condition

1 ea M908003P Ransome Model 1212 6’ x 8’ Manipulator and Travel Car with Track. 6’ constant speed lift from 57.75” to 105.75”. 1 to 62 IPM variable speed reach from 27” to 122”. 360 degree manual mast rotation. 5 to 200 IPM Variable speed travel car that runs on 70’ (2 sections 20’, 3 sections 10’) of 33 gauge track. Currently equipped with 4 ea Lincoln DC-600 power supplies, 2 ea Lincoln NA-3N controls with feed heads, vertical and horizontal adjusters for each weld head all mounted on manual spotting cars mounted on the manipulator boom and an Invincible flux recovery system. 460 volt. Serial #629592 Good Condition

1 ea M904018 Ransome Model XXHD 7’ x 15’ Travel Car Manipulator. 7’ powered elevation from 77” to 164” to the bottom of the boom. 2.7 to 108 IPM variable speed reach from 64” to 244” from the center of the mast rotation. 360 degree power mast rotation. 2,000 lb load capacity either or both ends. Mounted on a variable speed travel car that runs on 84” gauge rail track. Track NOT Included. 460 volt. Serial #909286 Reconditioned Price or As-Is Price

1 ea M309004 Mark "V" 8' x 5' Manipulator and Travel Car. 8' Constant Speed Power Elevation from 32" to 128". 5' Variable Speed Power Reach from 15" to 75". Manual Mast Rotation. With 6" Linde Powered Horizontal and Vertical Cross Slides and a Manual Rotary Slide. All Mounted on a Manual Travel Car that Runs on Inverted Angle Iron Track (Track Not Included). Currently Equipped with a L-Tec 650 CC/CV Power Supply, GMA Feed Head and all Cables. Remote Control Console for all functions Including Welding Process. Serial #6620-34-31 Good Condition

 

1 ea M909007P Pandjiris Model 8 X 8 Manipulator. 300 lb load capacity either end, 500 lb total weight capacity. 8’ constant speed powered lift from 21” to 117”. 3 to 117 ipm variable speed power reach from 20-5/8” to 112”. 360 degree manual king pin “X” frame base. Currently equipped with a Jetline 9200 weld oscillator, a Cyclomatic 6” x 6” seam tracker, a 6” manual cross slide and a rotary cross slide. 115 volt. Serial #11998X02-2 Very Good Condition

1 ea M906039 Aronson G8VRA8CL-PK 8’ x 8’ Locust “I” Manipulator. 8’ variable speed reach from 13” to 109” from the center of the mast rotational axis. 8’ constant speed lift from 29.5” to 125”. 300 lb load capacity either or both ends. 360 degree manual mast rotation. Portable king pin base. 115 volt. Serial 86528 Good Condition

1 ea. M404001 Precision 9’ x 9’ x 27-1/2’ Heavy Duty Manipulator/Travel Car System. This system was manufactured for the Robotics Industry for precision welding on military vehicles. Heavy Duty Mast has 9 ft. of constant speed of precision screw driven lift starting at approx. 36” from the floor to 144” high under the boom. The mast has manual rotation with lock. Boom has 9 ft. of “Dual Pinion” variable speed gear drive and rolls on Thompson Round way roller system. Weight capacity approx. 750 lb. Travel car is 5’ x 5’ x 19” High and Variable Speed Rack & Pinion Drive on 33 ft. of Thompson Round way Precision Track. All three (3)-axis paths are accordion booted. This system is now Servo driven. We will change to Pendant AC-Inverter or D.C. Drives. Very Good Condition

1 ea M103004 Aronson Model 2G10VRA10CL-SK 10’ x 10’ Manipulator. 400 lb weight capacity either or both ends. 10’ constant speed powered lift from 37.25” to 157.25”. 10’ Variable speed reach from 13” to 133” from the center of the mast. Manual mast rotation. Mounted on a manual travel car with 10’ inverted angle iron track. Currently equipped with a Lincoln DC-600 power supply, a Lincoln NA-5 head and control, cables and vertical and horizontal adjusters. 230 Volt. Serial #733. As Equipped!! - Good Condition

1 ea M905017 Aronson 2G10VRA10CL-PK 10’ x 10’ Locust “II” Manipulator. 119.5” variable speed reach from 13.5” to 133” from the center of the mast rotational axis. 120” constant speed lift from 49” to 169”. 400 lb load capacity either or both ends. 360 degree manual mast rotation. Portable “X” frame base with caster option. Pendant control. 230 or 460 volt. Serial #8022 Good Condition

1 ea M807004 Ransome Model 1212 12’ x 12’ Travel Car Manipulator. 750 lb weight capacity either or both ends. 38 ipm constant speed power lift from 62.25” to 206.25”. 3.35 to 134 ipm variable speed reach from 39.5” to 183.5”. 360 degree manual mast rotation. Mounted on a 33 gauge rack and pinion travel car with a speed range from 5 to 200 ipm. Travel car includes 30’ of track. Pendant control for all functions. Welding equipment NOT included. 460 volt. Serial #692597 Good Condition

1 ea M100530P Webb MB1212 12’ x 12’ Travel Car Manipulator. 12’ constant speed screw driven powered lift from 51” to 195”. Variable speed rack & pinion driven reach from 32” to 176”. 360 degree manual mast rotation. Mounted on a variable speed travel car that runs on 56-1/2” gauge track (track NOT included). 230 or 460 volt. Serial #7042 Good Condition

1 ea M710002 Ransome Model XXHD 13.5’ x 18’ Travel Car Manipulator. 13.5’ powered elevation from 77-1/2” to 239-1/2”” to the bottom of the boom. 2.7 to 108 IPM variable speed reach from 55” to 271” from the center of the mast rotation. 360 degree power mast rotation. 2,000 lb load capacity either or both ends. Mounted on a variable speed travel car that runs on 84” gauge rail track. Track NOT Included. 460 volt. Serial #639089 Reconditioned Price or. As-Is Price 



Reconditioned Welding Manipulators Pictures

Used Welding Positioners
 Contact


We accept VISA, Master Card and American Express


 

Web Site Inventory Links Page
Welding Positioners | Sub Arc Welding Manipulators | Seam Welders | Tank Turning Rolls | Welding Turntables Headstock Tailstocks | Cutting Machines | Robotic Equipment | Miscellaneous Used Welding Equipment Products Page | Welding Side Beams | Used Welders | Used Automation Welding Equipment | Product Links Page | Welding Rotators | Site Map | Email


sales@usedweldingpositioners.com

Updated December 17, 2009