|
|
|
||
|
|
|
|
|
Welding Head Stocks and Tail Stocks
|
ARO HS2VF NEW
Koike-Aronson 2,500 lb HeadStock. 2,500 lb load capacity @
6 C.G., Variable speed rotation from .01 to 1.0 RPM.
27.75 Fixed height to the center of the rotational axis.
30 x 30 Square table with slots. 12 Remote pendant
control. 460 Volt.
ARO TS2 New Koike-Aronson 2,500 lb Tailstock. 2,500 lb Load capacity @ 6 C.G., 27.75 Fixed height to the center of the rotational axis. 30 x 30 Square table with slots. ARO HS4VF NEW Koike-Aronson 4,500 lb HeadStock. 4,500 lb load capacity @ 6 C.G., Variable speed rotation from .01 to 1.0 RPM. 27.75 Fixed height to the center of the rotational axis. 30 x 30 Square table with slots. 12 Remote pendant control. 460 Volt. ARO TS4 New Koike-Aronson 4,500 lb Tailstock. 4,500 lb Load capacity @ 6 C.G., 27.75 Fixed height to the center of the rotational axis. 30 x 30 Square table with slots H606002 Bignall-Keeler Model 8A Dual Sided Headstock. 2,000 lb Weight Capacity. 10 Diameter Thru Hole Chuck Capacity. Variable Speed Rotation. 44 Fixed Height to the Center of the Rotational Axis. 230/460 Volt. Serial #5979 As-Is in Working Condition. H205007 Ransome 3T Tailstock Positioner. 3000 lb cap. @ 12" C.G. from Table Surface and 12" Eccentric from Rotation Center. 40" Square Table with Slots. Serial #63721 Good Condition. H984001P Pandjiris TS-30, 3000 lb Tailstock. Adjustable Rotational Height from 31 to 51 by 4 ea 5 adjustments. 30 Square Table w/ 4 Slots. Excellent Condition. H307002 Aronson TS-4 Tailstock, 4,500lb Capacity @ 12 C.G., 30 Square Table with Slots. Serial # N/A Good Condition. H707008 Koike-Aronson Model HS-6 6,000 lb Headstock. 6,000 lb capacity @ 12 C.G., Variable speed rotation from .025 to 1.5 RPM. 36 fixed height to the center of the rotational axis. 48 square table with slots. Pendant control. 460 volt. Serial #75168 Ready to Ship !! Excellent Condition H102204 Aronson HS-10 GE, 10,000 lb Geared Elevation Headstock Positioner. Capacity 5 Tons @12 C.G. from Table & Center of Rotation., Variable Speed Rotation by new AC Inverter Control. Powered Geared Elevation of 20 to 72 Cent. of Rot. from Floor. 36 dia. Round Table with 9 Thru Hole. Ser. #695. PMd by Aronson. Very Good Cond. |
H1011005 Teledyne-Readco
HTS-250, 12,500 lb Headstock Positioner. Capacity 12,500 lbs @
12 (25,000 lbs @ 6 with Suitable Tailstock) Var. Speed
Rotation by New AC Inverter Drive. 3 HP Motor. 54 x 54
Square Table with Tee Slots. Approx. 55 Ctr. of Rot. from
Floor. Ser. # 105836 Good Condition (2-4 wks).
H508004 Crossroads 90 Degree Indexing Headstock/Tailstock. 20,000 lb Concentric Load Capacity. To Index Part from Flat to 90 Degrees Only in one Direction and then Back to Starting Position. 59 to the Center of the Rotational Axis. Electric/Hydraulic Driven. 230/460 Volt Input. Good Condition. H211007 Teledyne Readco 20,000 lb Headstock/Tailstock. 20,000 lb Capacity @ 6" C.G., Variable Speed Rotation. 53" Diameter Round Table with Slots. Forward/off/Reverse Foot Pedal. Headstock is Mounted on a Screw Driven Variable Speed Travel Car on 9' of Track. Tailstock has a 24" Diameter Through Hole. Pendant Control for all Functions. Serial #106-633 Good Condition. H211008 Teledyne Readco 20,000 lb Headstock/Tailstock. 20,000 lb Capacity @ 6" C.G., Variable Speed Rotation. 60" Diameter Round Table with Slots. Forward/off/Reverse Foot Pedal. Headstock is Mounted on a Screw Driven Variable Speed Travel Car on 9' of Track. Tailstock has a 30" Diameter Through Hole. Pendant Control for all Functions. Serial #106-634 Good Condition. H504001&2 Komatsu
25,000 LB Head/Tail Stocks. Cap. 25,000 @ 6 Center of
Gravity off of the center line of Rotation. These
Head/Tailstocks were used with a large Robotic Manipulator
that was Welding Earth 20 ft. long Mover Boom Sections. They
have Dual Directional Hydraulic Clamping Devices for holding
the fixture or work pieces. They are designed for large
Eccentric Loads and have integral counter weights. They now
have Servo Motors that are 1500 rpm and 2.8 kw. and
produce 2.1 rpm. The braking is done by a Hydraulic Disc
Caliper. The Servo Motors can be replaced by an AC
Inverter Drive for Manual Operation AS-IS No
Changes. We Change to AC-Inverter Drive with Pendant Control
Variable Speed. H209001 Ransome Model 7H 24,000 lb Headstock. 24,000 lb Capacity @ 12 C.G., Constant Speed Rotation of .56 RPM, Height of 58 to the Center of the Rotational Axis, 60 Square Table with Slots, Pendant Control. Serial #N/A Good Condition. |
Used Welding Positioners
Contact
We accept VISA, Master Card and American
Express
Web Site Inventory Links Page
Welding Positioners | Welding Manipulators | Seam Welders | Tank Turning Rolls | Turntables
Headstock Tailstocks | Cutting Machines | Robotic Equipment | Miscellaneous Used Welding Equipment
Products Page | Welding Side Beams | Used Welders | E-Mail | Links Page | Welding Rotators | Site Map
sales@usedweldingpositioners.com
