Welding Pipe Rollers and Tank Welding Rotators

Welding rotators and tank and pipe turning rolls for rotating weld fabrication.

Be-co Model F-400 Standard Universal Power Unit for Pipe and tank Rotating. Intended for both automatic and hand work, the F-400 is equipped with a ½-horsepower AC/DC motor, a 400:1 gear ratio, and dual-speed drive allowing either 3 to 20 or 5 to 30 inch-per-minute rotational speed. Our Standard BE-CO units will accommodate pipe sizes from 2" to 10’ diameters with quick-connecting expansion chains Be-co NEW Model F-600 Heavy Duty Universal Power Unit. A heavy duty power unit with greater turning force for larger tank rotation This unit is identical to the Model F-400 standard power unit, but with a 600:1 gear ratio providing a choice of 2 to 13 1/3 or 3 1/3 to 20 ipm rotational speed. "New"  Any PRO TR1500 "New" Profax 1,500 lb Pipe Rotating Turning Rolls. 1,500 lb Turning Capacity (750 lb Max Set Down Weight for each the Drive and Idler). 1-1/2" to 16" Diameter Capacity. Variable Speed from 0.0 to 140 IPM. 10" Diameter x 2" Wide Rubber Wheels. High Frequency Protected. 115 Volt.Brand New – WPI TRD2000/WRI2000 "NEW" #2000 Turning Rolls. Pipe Drive Roll & Idler each have a capacity of 2000 lbs. For diameters from ½" to 40". 10" diameters. wheels, High Frequency Protection, Variable Speed Control. With on/off Foot Switch. 115 volt "NEW" GEN TR0100 "NEW" Gentec Rotators for Welding Pipe Model TR-0100 2,200 lb Turning Roll Set. 2,200 lb total weight capacity. 1" to 31" diameter capacity. Variable speed from 3.5 to 63 IPM. 2" wide x 8" diameter polyurethane wheels. High frequency protected. 115 volt. NEW in Stock!! Ready to Ship   PAN PIPER 3 "NEW" Pandjiris Piper 3 Pipe Rollers. 4,000 lb Load Capacity, Add an Additional Idler for a Total Capacity of 6,000 lb. 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Drive and 1 ea. Idler. Pendant Control. "NEW" ! PRE RPJS 50 Preston-Eastin Model RPJS-50 5,000 lb Pipe Support Stand used to support pipe in concert with a headstock positioner . 5,000 lb weight capacity. 2” to 40” diameter capacity. Manual adjustable height from 27.5” to 37.5” to the top of the rolls. Brand New – Ready to Ship! WPI T6/I6 "NEW" Weld Plus #6000 Welding Rollers. 6000 lb Capacity Set Includes: 1 Drive Roll & 1 Idler Roll. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3" to 72" via 3 Ctr. 115 volt. Ship Wt. 490 lbs/set. "NEW"  WPI T9D 8 "NEW" #6000 Turning Rolls. 6000 lb Capacity (Add an additional idler for a total capacity of 9,000 lb.). Set Includes: 1 Drive Roll & 1 Idler Roll. Dual Driven Power Unit. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3" to 96" via 4 Ctr. 115 volt. Ship Wt. 580 lbs/set. "NEW T-18/I-18 "NEW" 12,000 lb Pipe Rolls. Set Includes 1 T-18 Driver and 1 I-18 Idler (add extra Idler for 18,000 lb Capacity). 12" Diameter Rubber Wheels, 2 Wheels per Axle for 7" Total Wheel Face. For Diameters from 12" to 12’. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship TANKERS 150/75 "NEW" Pandjiris 15,000 lb Tanker Pipe Rotators Set. 15,000 lb weight capacity. 3.5" to 12’ diameter capacity. Variable speed from 2.9 to 72 IPM. 25’ pendant control. 115 volt. No wheel adjustments to be made for the full range of diameters and Tankers maintain a constant center line !! NEW in Stock!! Ready to Ship T-24/I-24 "NEW" 16,000 lb Turning Rolls. Set Includes 1 T-24 Driver and 1 I-24 Idler (add extra Idler for 24,000 lb Capacity). 12" Diameter Rubber Wheels, 3 Wheels per Axle for 10.5" Total Wheel Face. For Diameters from 12" to 16’. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship T-30/I-30 "NEW" 20,000 lb Turning Rolls. Set Includes 1 T-30 Driver and 1 I-30 Idler (add extra Idler for 30,000 lb Capacity). 12" Diameter Rubber Wheels, 4 Wheels per Axle for 14" Total Wheel Face. For Diameters from 12" to 16'. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship IRC 15 5D/5I "NEW" Irco Rotators 20,000 lb. Turning Rolls. Set Includes 1 15-5 Driver and 1 15-5 Idler (add extra Idler for 30,000 lb Capacity). 12” Diameter x 3" Wide Rubber Wheels, 2 Wheels per Axle for a 6” Total Wheel Face. For Diameters from 12” to 12’. Variable Speed from 2 to 55 IPM. With Remote Pendant Control. 460 Volt. Shipping Weight 1,550 lbs./set. Ready to Ship! New

R-500/I-500 "NEW" Webb 40,000 lb Turning Rolls. Set Includes 1 R-500 Drive and 1 I-500 Idler (add extra Idler for 60,000 lb Capacity). 18" Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7". For Diameters from 10" to 15’. Variable Speed from 7 to 58 IPM. With Remote Pendant Control. 460 Volt. Brand New Welding Rotators IRC 30 10D/10I "NEW" Irco 40,000 lb. Turning Rolls. Set Includes 1 30-10 Driver and 1 30-10 Idler (add extra Idler for 60,000 lb Capacity). 12” Diameter x 4" Wide Rubber Wheels, 2 Wheels per Axle for a 8” Total Wheel Face. For Diameters from 12” to 12’. Variable Speed from 2 to 55 IPM. With Remote Pendant Control. 460 Volt. Shipping Weight 1,850 lbs./set. Ready to Ship! New WRD-20/WRI-20 "NEW" Koike-Aronson Rotators, 20 Ton Turning Rolls. Capacity: 1 Drive, 1 Idler 20 Tons. Add 1ea additional Idler (not included) Cap. 30 Tons. Three (3) 12" dia. X 4" Rubber Wheels per axle with Overload Disc. Variable Speed of 2 to 50 IPM surface speed.. For work diameters from 6" to 13 ft. Remote Pendant Control. Input Power 460 volt 1 phase. NEW! MM30/15 "NEW" Pandjiris Missouri Mule 30/15 Turning Rolls. Drive and Idler. 60,000 lb Weight Capacity. 12" to 16’ Diameter Capacity. Variable Speed from 5.3 to 53 IPM. 20" Diameter x 10" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW" Additional Idlers Available IRC 45 15D/15I "NEW" Irco 60,000 lb. Turning Rolls. Set Includes 1 45-15 Driver and 1 45-15 Idler (add extra Idler for 90,000 lb Capacity). 20” Diameter x 4.5" Wide Rubber Wheels. For Diameters from 12” to 20’. Variable Speed from 1.5 to 45 IPM. With Remote Pendant Control. 460 Volt. Shipping Weight 3,550 lbs./set. Ready to Ship! - New R-1000/I-1000 "NEW" 66,000 lb Turning Rolls. Set Includes: 1 ea R-1000 Driver, 1 ea R-1000 Idler (add extra idler for 100,000 lb capacity). Rubber Wheel diameter 18" with 2 Wheels per axle for a Total Wheel face of 14". For Diameters from 10" to 20'. Variable Speed fro 7 to 58 IPM. With Remote Pendant Control. 1 year warranty. We stock 460 volt, 230 on request. Brand New R-1500, 100,000 lb Turning Rolls. Set Includes: 1 ea R-1500 Driver, 1 ea R- 1500 Idler (add extra idler for 150,000 lb capacity). Rubber Wheel diameter 18" with 3 Wheels per axle for a Total Wheel face of 21". For Diameters from 10" to 22'. Variable Speed from 7 to 56 IPM. With Remote Pendant Control. 1 year warranty. We stock 460 volt, 230 on request. Brand New CPRR / CIRR “NEW” Ransome Tank Rotators 60 Ton “C” Series Turning Roll Set. Set includes 1 each CPRR drive unit and 1 each CIRR idler unit for a capacity of 60,000 lb (add an additional idler for a total capacity of 90 ton.). Variable Speed drive from 1.45 to 58 ipm. 20.5” diameter x 14” wide rubber wheels. For diameters from 7” minimum to 20’ maximum. 20’ Pendant control for all functions. 460 volt. Shipping weight 5,600 lbs/set. NEW – Ready to Ship Preston-Eastin "NEW" TDRA/TIRA-120, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20" dia. x 8" wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8" to 16 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control 460 volt input. Preston-Eastin "NEW" TDRA/TIRA-120-22D, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20" dia. x 8" wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8" to 22 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control. 460 volt input. "New" in our Stock! PR180/60 "NEW" Pandjiris Model PR-180/60 Turning Rolls. Drive and Idler. 120,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 180,000 lb). 12" to 21’ Diameter Capacity. Variable Speed from 3.0 to 75 IPM. 20" Diameter x 15" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW" Additional Idlers Available PR270/90 "NEW" Pandjiris Model PR-270/90 Turning Rolls. Drive and Idler. 180,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 270,000 lb). 12" to 21’ Diameter Capacity. Variable Speed from 5.6 to 55.7 IPM. 20" Diameter x 20" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW"  Additional Idlers Available We stock all types and size Tank rotators and Pipe Rollers. New Used and Reconditioned Rolls

Used Welding Positioners
 Contact


We accept VISA, Master Card and American Express

Web Site Inventory Links Page
Welding Positioners | Sub Arc Welding Manipulators | Seam Welders | Tank Turning Rolls | Welding Turntables Headstock Tailstocks | Cutting Machines | Robotic Equipment | Miscellaneous Used Welding Equipment Products Page | Welding Side Beams | Used Welders | Used Automation Welding Equipment | Product Links Page | Welding Rotators | Site Map | Email

sales@usedweldingpositioners.com