Circle Spud Welder - Weld -
A - Rounds
1 ea C100402 Cypress CWG-1100 Circular Welder. 10
to 50 diameter capacity. Variable speed from .06 to 72 IPM. Rise
& fall range from 0 to 7. 400 amp 60% duty cycle. Vertical
& horizontal torch adjusters. Burn back control. 120 volt. Serial
#C010904 Good Condition
1 ea C100401 Bancroft Model 500 Weld-a-round. 150
lb clamping force. Adjustable 8 vertical stroke. Rack and pinion
torch adjuster 0.7 to 14 RPM rotational speed. 500 amp rotary ground.
Water cooled torch. Air powered arc screen lifter. 50-550 ipm integral
Miller S-60 wire feeder. 120 volt. Serial #3657-1/118-012 Excellent
Condition !
1 ea C608003 Compakomatic Model 1025 Rotomatic
Mig Weld-A-Round. 0 to 6 Diameter Capacity. Manual Adjustable
Height. Variable Speed from .30 to 15 RPM. Adjustable Rotational
Overlap from 0 to 360 Degrees. 6 Air Torch Lifter. Model 375
Rotational Control. 600 amp Current Capacity. Miller 300 amp Power
Supply. Serial #GM-154 Good Condition
1 ea C804006 Compakomatic Model 920E
Weld-a-Round. 8 maximum part diameter. 13 maximum part
height (can be increased with a riser). 7 pneumatic torch lifter.
Compakomatic series 400 control. 115 volt. Serial #GM241 Good
Condition
1 ea C604008 Machine Technologies GTAW
Weld-a-Round. 12 Part Diameter Capacity. 6 Part Height
Capacity (Can be Increased with a Torch Riser). 1 Vertical Torch
Lifter. Weld Over Lap Timer. All Functions Controlled with a
Programmable PLC. Welding Equipment Includes a 1994 Miller Maxstar 152
with Snap Start, Miller Water Circulator and a 250 Amp Water Cooled
Tig Torch. Serial #1-549-2 Good Condition
1 ea C508001 Rumble Automation Weld-A-Round
Circular Spud Welding Station. 5 Vertical Stroke.
Variable Speed Torch Rotation by a 3 Turn Potentiometer. 36 High
Work Table. 32 Part Diameter Capacity. 6 Diameter Weld Capacity.
Currently Equipped with a Hobart Auto-CVS Wire Feeder. Power Supply
NOT Included. 575 volt. Serial #100-64-3712 Good Condition
1 ea C810002P Bancroft Weld-A-Round 300 Circular
Spud Welder. The Weld-A-Round 300 is the most popular
stationary circular welding system in the welding industry. 300
Amp ground capacity. 75 lb clamping force. 8 vertical
stroke. 0.7 to 14 RPM travel speed. 24 diameter round table.
Welding equipment NOT included. Serial #n/a Good Condition
1 ea C612015 Bancroft Weld-A-Round 300 Circular
Spud Welder. The Weld-A-Round 300 is the most Popular
Stationary Circular Welding System in the Welding Industry. 300
Amp Ground Capacity. 75 lb Clamping Force. 8 Vertical
Stroke. 0.7 to 14 RPM Travel Speed. Welding Equipment NOT Included.
Serial #50359-10 Good Condition
1 ea C612014 Bancroft Weld-A-Round 300 Circular
Spud Welder. The Weld-A-Round 300 is the most Popular
Stationary Circular Welding System in the Welding Industry. 300
Amp Ground Capacity. 75 lb Clamping Force. 8 Vertical
Stroke. 0.7 to 14 RPM Travel Speed. Equipped with rise and fall
option. Welding Equipment NOT Included. Serial #50123-01 Good
Condition
1 ea C609008 Bancroft Weld-A-Round 300 Circular
Spud Welder. The Weld-A-Round 300 is the most Popular
Stationary Circular Welding System in the Welding Industry. 300
Amp Ground Capacity. 75 lb Clamping Force. 8 Vertical
Stroke. 0.7 to 14 RPM Travel Speed. Bench Mounted. Welding Equipment
NOT Included. Serial #N/A Good Condition
1 ea C906001 Bancroft Weld-A-Round 300 Circular
Spud Welder. The Weld-A-Round 300 is the most popular
stationary circular welding system in the welding industry. 300
Amp ground capacity. 75 lb clamping force. 8 vertical
stroke. 0.7 to 14 RPM travel speed. 24 diameter round table.
Welding equipment NOT included. Serial #n/a Good Condition
1 ea C512001 Bancroft 350 High Capacity Dual
Head, 3 Station Indexing Weld-a-Round. Bancroft is the
Manufacturer of the Most Popular Stationary Circular Welding System in
the Welding Industry. Both Weld Stations have 8 Vertical Stroke
with a 150 lb Clamping Force and Variable Speed Torch Rotation from
0.7 to14 RPM. 300 amp Capacity. A 3 Position Indexing Table for
Loading of Parts and Welding Under 2 Separate Weld Stations. Can be
Used for 2 Passes on One Part or One Pass on Two Individual Parts with
Proper Fixtures. Currently Set up for GTAW Application. Serial
#3300/109-003 Good Condition
1 ea C501001 WeldLogic CWT-12-15V Vertical
Welding Positioner. Precision Vertical Positioner with
Self-Centering 3 Jaw Chuck, 6 Dia. Torch Holder Post with Pneumatic
Torch Retract. 100 lb Capacity. Serial #CWT-12SN9413 Very Good
Condition
1 ea C903003 WeldLogic CWT-12C Circular Dual
Torch Vertical WeldingSystem. 10 maximum part diameter
capacity. Precision variable speed 100 lb capacity vertical
positioner. Dual torches mounted on 11.5 vertical torch slides for
a torch height from 9.5 to 21 and 3.5 vertical slides. System
includes 2 each AWS-150 DC constant current power supplies with air
cooled tig torches. Remote control for all functions. 115 or 230 volt.
Serial #00211780 Good Condition
1 ea C412001 Alloy Custom Circular Welder. 75
lb Capacity, Variable Speed (0.8 50 RPM) 4 3-Jaw Chuck, Lever
Actuated Gravity Type Part Hold Down Mounted on 6 Slide. 6
Maximum Part Diameter, 6 Maximum Part Height. 3 Axes of Torch
Adjustment. Analogue Weld Control 10 Turn Potentiometer for
Accurate Speed Control, Start/Stop w/ E-Stop, Forward/Reverse. Manual
Flip-down 4 x 5 Shaded Lens for Weld Viewing Good Condition
1 ea C205002 Alltra Corporation Model VWL2436
Circular Welder. Vertical Lathe with an 18" Part Diameter
Capacity, 24" Part Length Capacity and an Air Actuated Centering
Head. A Complete System that Includes a Lincoln DC-400 CC/CV Power
Supply, Lincoln NA-5R Head and Control with a Lincoln Analog Interface
Procedure Control, Miller Coolmate 4 Water Circulator, 20"
Motorized Horizontal and Vertical Cross Slides, Allen-Bradley SLC5/04
Control and Allen-Bradley Panelview 1400 Monitor with Operator
Friendly Touch Screen Programming. Manufactured in 1998. Serial
#2211 Excellent Condition
1 ea C912010 Cecil Peck Circular Welder. Manual
Table Lift. No Table. 1" to 6" Diameter Capacity. Variable
Speed Rotation. Pedestal Control Console for all Functions. No Welding
Equipment. Serial #N/A Good Condition
1 ea C805022 Cecil Peck Circular Welder. Hand
Wheel Table Lift. 1 to 6 welding diameter capacity. 43 part
diameter capacity. Variable Speed Rotation. Pedestal Control Console
for all Functions. Welding equipment NOT included. Serial #n/a. Good
Condition
1 ea C406001P Cecil Peck Circular Welder. Manual
Table Lift. No Table. 1" to 6" Diameter Capacity. Variable
Speed Rotation. Pedestal Control Console for all Functions. No Welding
Equipment. Serial #N/A As Is Price
1 ea C204001 Cecil Peck Circular Welder. Hand
Wheel Table Lift. 36" x 30" Tee Slotted Table. Variable
Speed Rotation. Pedestal Control Console for all Functions. Equipped
with a Lincoln NA-2 Submerged Arc Control and Welding Head and a
R3S-600 Power Supply. Serial #69203 Good Condition
1 ea C906037 Quest Large Capacity Weld-A-Round. 14
maximum part height capacity. 1 to 36 part diameter capacity.
6 pneumatic stroke clamping. Digital speed tachometer. Currently
equipped with a Miller Deltaweld 652 power supply and a S-62 series
feeder. 230 or 460 volt. Serial #n/a Good Condition
WELDING AUTOMATION
SYSTEMS
1 ea WS100305P Ogden Dart Dual Head
Submerged Arc Beam Welding System. 117 welding table that has
50 of hydraulic clamping by cylinders every 12 down the 50
length. 5 to 26 clamping capacity. 2 each hydraulic pumps with
reservoirs. Variable speed welding carriage with 15 air powered
vertical lifters, 30 horizontal air powered slides and manual
spring loaded seam trackers. Welding equipment includes 2 each
Lincoln DC-1500 power supplies, 2 each Lincoln NA-5 controls and heads
that each are set up for tiny twin arc wire, a flux recovery system
and all cables with cable tray. Serial #1570 Good Condition
1 ea WS909006 1996 Cypress Sprinkler
Fabrication System. This 26 system includes the following : 1
ea Model CB-10P Cypress plasma cutting head with a Thermal Dynamics
Signature 1250 cutting system mounted on a manual travel car, 1 ea
Model CW-5 Cypress welding head with a Lincoln DC-600 power supply and
a pendulum type weld oscillator mounted on a manual travel car, 1 ea
26 long side beam with 4 each bolt down mounting stations. Very
Good Condition
1 ea WS901021 Pandjiris Stationary Manipulator
Arm and Unit Frame Turning Roll System. A Pandjiris stationary
manipulator arm with a fixed height of 45.5 under the arm and a
length capacity of 40. The turning rolls have a 68,000 lb turning
capacity. 7 to 14 diameter capacity with a fixed axel center of
72. Variable speed rotation. 5 sets of 5 wide x 20 diameter
rubber wheels spaced over the 30 length of a variable speed travel
car that runs on 69 gauge rail track. Welding equipment can be
mounted on the end of the manipulator arm for internal longitudinal or
circumferential welding on cylinders. 460 Volt. Serial #66-4595 Good
Condition
1 ea WS901022 Pandjiris Stationary Manipulator
Arm and Unit Frame Turning Roll System. A Pandjiris stationary
manipulator arm with a fixed height of 45.5 under the arm and a
length capacity of 40. The turning rolls have a 68,000 lb turning
capacity. 7 to 14 diameter capacity with a fixed axel center of
72. Variable speed rotation. 5 sets of 5 wide x 20 diameter
rubber wheels spaced over the 30 length of a variable speed travel
car that runs on 69 gauge rail track. Welding equipment can be
mounted on the end of the manipulator arm for internal longitudinal or
circumferential welding on cylinders. 460 volt. Serial #n/a Good
Condition
1 ea WS809001 Compak-o-matic Model 440A 6
Linear Dual Torch Mig Welding System. 6 maximum welding length.
Dual torch with up to 13 between the torch heads. 6 manual
in/out slide for fine adjustment. 3 manual right/left fine
adjuster. 6 stroke in/out indexing table for loading and unloading.
System includes 2 wire feeders and system controller. Welding power
supplies NOT included. Serial #GY211 Good Condition
1 ea WS704015 Hobart Manipulator / Positioner TIG
Welding System. Includes a 1,500 lb capacity @ 4 C.G.
positioner with power tilt and variable speed rotation. Positioner is
mounted on a manual travel car with 2 travel. Manipulator has
powered lift from 30 to 90, manual reach from 35 to 59
from the center of the mast. And a 6 horizontal adjuster. Current
welding equipment includes a Jetline model ALC- 401-6 Arc Length
control and model 9629 controller and a Jetline CWF-10A cold wire
feeder. All equipment mounted into a single skid frame base. Serial
#41-1641. Very Good Condition
1 ea WS703010 Cissel 12 x 4 Submerged Arc
Welding Gantry. 12 variable speed rack and pinion driven
carriage. 4 variable speed Lincoln TC-3 carriage on the cross boom.
Complete Lincoln NA-5 sub arc package. Serial #111978 Good
Condition
1 ea WS702002 Weldlogic Positioner/Tig Welding
System. A Weldlogic 200 lb capacity positioner with a 12
capacity chuck integrated with a Weldlogic complete GTAW welding
system. Welding system includes a Weldlogic RPW-2000 power supply,
Weldlogic cold wire feeder, Weldlogic arc length control, Weldlogic
weld oscillator and pendant control for programming all functions. 230
volt. Serial #9914760 Good Condition
1 ea WS702003 Weldlogic Positioner/Tig Welding
System. A Weldlogic 200 lb capacity positioner with a 12
capacity chuck integrated with a Weldlogic complete GTAW welding
system. Welding system includes a Weldlogic RPW-2000 power supply,
Weldlogic cold wire feeder, Weldlogic arc length control, Weldlogic
weld oscillator and pendant control for programming all functions. 230
volt. Serial #9730194 Good Condition
1 ea WS604010 1996 Weldline / Miller
GTAW Circular Welding Station. Weldline Automation Model WA-2 200
lb Capacity Positioner with a ½ to 16 Capacity 3-Jaw Chuck,
Weldline 6 Arc Length Control, Weldline Weld Sequence Control,
Weldline Cold Wire Feeder, 4 Manual Cross Slide and Rotary Slide.
Pneumatic part Clamping. Welding equipment Includes a Miller XMT-304
Inverter Power Supply, Miller HF-251D-1 High Frequency Arc Starter,
Miller PC-300 Pulse Control, Tweco TC900 Water Circulator and a
Weldcraft WP-27 500 amp Water Cooled Tig Torch. Serial # N/A Good
Condition
1 ea WS601002 Arc Systems Automatic Pipe Welding
System. System Includes a Preston-Eastin HS-2S 2,000 lb
Capacity @ 6 C.G. Headstock with a 20 Diameter Scroll Chuck that
has a 6-1/2 Thru Hole. A Weldlogic AWS-150 Advanced Tig Welding
System that Includes Controls for Variable Speed Rotation of
Headstock, Weld Current Control, Arc Distance Control, Cold Wire Speed
Control and Feeder and a 1.0 to 150 amp DC Power Supply. 3 eacg 6
Manual Slides for 3 Axis Adjustment of Torches. All Controls are
Mounted in a Single Remote Pendant Control. 230/460 Volt. Serial
#HS2S-13 Good Condition
1 ea WS509001 Pandjiris 1998 Hot Wire Tig
Pipe Welding Station. A Complete Hot Wire Tig Pipe Welding Station
that Includes a Pandjiris 4 x 4 Manipulator on Travel Car, 2
each Pandjiris HS-20PE-VS Headstocks with TJ-20 Chucks, Pandjiris Pipe
Supports on Manual Travel Cars, Miller / Jetline Welding Package and a
Complete set of 50 Tracks. Please Ask for a Detailed
Specification Sheet. Excellent Condition
1 ea WS507001 Mark Five Manipulator/Turntable
System. Turntable : 1,000 lb Capacity, 20 High. 24 Diameter
Table with Slots. Variable Speed Drive from .01 to 1.4 RPM. The
Manipulator if Fixed Over the Turntable with a Manual Lift of 34
from 5.25 to 39.25 above the table and a Manual Reach of 24.
Serial #JN-1189 Good Condition
1 ea WS404001 Ransome Positioner / Manipulator /
Sub-Arc Welding System. System Includes a Ransome 5P 500 lb Cap. @
6" C.G. Positioner (Ser. #1314851) with Power Tilt, Variable
Speed Rotation and Manual Height Adjustment. A 3JC40 40" Diameter
3-Jaw, Self-Centering Welding Chuck. A Ransome Model 99 Manipulator
(Ser. #9526562) with 72" Power Elevation from 0 to 71" at
the Torch, Fixed Boom with a Manual Spotting Car from 44" to
88" from Center of the Mast, Manual Mast Rotation. A Complete
Lincoln DC-600 Sub-Arc System with NA-5 Control, Weld Head And A
Invincible Flux Recovery System. Very Good Condition
1 ea S412001 Cecil Peck Dual Position
Outside Corner Seam Welder. This Machine was Used to Tig Weld the
Outside Corners of Aluminum, Steel and Stainless Electric Panel Boxes.
The Dual Operator Positions were Used for Weld Lengths up to 17
Long. The Air Clamping Device and Copper Mandrel Plates Could
be Increased (Within Reason) for Longer Welds. The Torch Carriers are
Heavy Duty Variable Speed Devices that are ½ H.P. Dc Motors &
Drives. Reconditioned with 2 Cold Wire Feeders or Converted to
Mig Welding Including Power Sources
1 ea WS406001 Pandjiris Model SWPT-102 Dual Side
Beam Stiffener Welder. HD Welding Carriage, variable speed (0
200 IPM). Twin Cyclomatic Seam Tracking systems to locate torches on
opposing sides of stiffener. Open-End Gantry Style Yoke with 96"
of Weld Length allows loading of stiffener from one end. Advancement
of sheet is readily done with help from pneumatic plate lift rollers
that automatically lift part off back-up bar between welds. 15
Pneumatic hold down Clamps and Part Locators designed to automatically
locate and hold "I" or "U" shape stiffener in
place on sheet. No tooling or jigs necessary for part alignment.
Back-up Bar for heat sink and part distortion control. System is
capable of feeding Aluminum or Steel Wire using GMAW Process. Twin 180
degree water-cooled GMAW torches for high production. Remote Control
Podium. Was used for welding stiffeners for aluminum dump truck beds
and bodies. Very unique piece of equipment Must See!!! Very
Good Condition
1 ea WS411001 Linde PTA Surfacing System / 5 x 6
Manipulator. A Complete Linde Plasma Transfer Arc Weld Surfacing
System that Includes a C75-500 (500 amp, 60% Duty Cycle) Power Supply,
PTA Gun, Automatic Powder Feeder, 12 Manual Vertical Adjuster, and
a Linde Solid State Weld Oscillator. Gun, Vertical Adjuster, Powder
Feeder and Oscillator are Mounted on a Linde OM-48 Variable Speed
Travel Car that Runs on a Fixed Boom Manipulator with 6 of
Horizontal Travel and 60 of Vertical Travel from 31 to 91 by
a Screw Driven Manual Hand Wheel Lift. Good Working Condition
1 ea WS408001 Compak-o-Matic Rotary Welding
Station. System Includes a Ransome B-100, 100 lb Capacity Welding
Positioner, A Compak-o-Matic PC-300, 300 amp CV Power Supply, a Model
320 Wire Feed System with a Machine Torch, 8 Horizontal and
Vertical Torch Adjusters, and Model 263 Control Module with Weld Time
Function. Serial #1530 Good Condition
1 ea WS412001 Jetline Portable Heavy Duty Cast
Long Length Stellite Overlay System. Jetline TKK-24
Precision Screw Drive (1-1/2 screw) Side Beam with 24 Travel.
Heavy Duty 9-1/2 Power Vertical Slide, 8 of Z axis Manual Slide.
Long Rod Feeder with adj. dia. guide. Miller Oscillator with Center
Line Steering. Overall dimensions of Portable side Beam Assy. 76
high, 63 wide, 60 long. System includes Miller 300 amp
Synchrowave welder and Tig Torch. Excellent Condition!
1 ea WS999001 Linde/Jetline HWC-7 Cold Wire Tig
System. Jetline ZB-100 Positioner on moveable screw drive base.
Complete with HW-500SS Welder, Auto Controls, Cross Slides and Floor
Standing Base. Excellent Condition
1 ea WS006003 Hobart/Aronson 2 Station Automatic
Spud Welder. Mig Welds Rings up to 12 Diameter, Two alternate
weld stations w/ Air Clamping of parts. Control Console w/ Station
Selection. Many Tooling Fixtures. Var. Speed Rot. by 2 Aronson
positioners. Includes Hobart Dual Wire Feeder, Torches and Welder. Complete
System Ready to Weld
Robot Welding Cells
1 ea RC505001 2003 Panasonic 3 Axis Model ISP
Cartesian Robotic Tig Welding Cell. Initially powered up in
November 2003 this cell was used off and on for approximately 8 months
before the application was discontinued. This Panasonic Model ISP
Cartesian Robot, has approx. 43 (x) horizontal movement, 15 (y)
vertical movement and 21 (z) horizontal movement. There is also a 2
axis clamping fixture or tooling table. The complete welding package
on this cell includes Two (2) Water Cooled Tig Torches with manual
adjustable separation of the torch holders on one axis, Two (2)
Panasonic YC-500WX4 Power Supplies completely integrated with all
regulators, hoses, cables etc. Water supply required. The welding cell
is 75 wide x 103 high x 145 deep and has a complete safety
package including, Powered Safety Screen, Light Package, Front
Operating Control and Palm Buttons. This cell could be changed to
the Mig welding process. This is a late model, low hour, system in
Excellent Condition!
1 ea RC505002 2003 Panasonic 4 Axis Model ISP Cartesian
Robotic Tig Welding Cell. Initially powered up in November 2003
this cell was used off and on for approximately 8 months before the
application was discontinued. This Panasonic Model ISP Cartesian
Robot, has approx. 17 1/2 (x) horizontal movement, 10 (y)
vertical movement and 15 (z) horizontal movement. The Fourth Axis
is a Rotating Wrist movement for the Torch Holding Device. This Cell
also includes a Horizontal Moving Fixture/Tooling Table Integrated
with the Robot from the Load/Unload position to the Robotic Welding
Position. The Complete Welding Package on this cell includes one (1)
Panasonic YC-300WX4 Power Supply and One (1) Water Cooled Tig Torch
completely integrated with all cables, hoses, etc. Water supply
required. The welding cell is 75 wide x 103 high x 126 deep
and has a complete safety package including, Powered Safety Screen,
Light Package, Front Operating Control and Palm Buttons. This cell
could be changed to the Mig welding process. This is a current model,
low hour, system in Excellent Condition!
1 ea R510001P Motoman Model YRFL-NND10G 6-Axis Robot. 22 lb
Payload Capacity. Robot Controller NOT Included. 1986 Serial
#RH9963-6047-8 As-Is Only
1 ea R510011P Miller/OTC Model MRV-6 6-Axis Welding Robot. 132
lb Payload Capacity. 55.2 Reach. Includes a Miller Model C-1
Control Cabinet. Welding Equipment NOT Included. 1991. 190-575
Volt. Serial #KB168739 As-Is Only
1 ea R510012P Miller/OTC Model MRV-6 6-Axis Welding Robot. 132
lb Payload Capacity. 55.2 Reach. Includes a Miller Model C-1
Control Cabinet. Welding Equipment NOT Included. 1992. 190-575
Volt. Serial #KC301838 As-Is Only
1 ea WS605013P Cybotech Automatic Manipulator / Positioner Tig
Welding System. System Includes A Fabspec 2,500 lb Capacity
Positioner, a 6 Axis Cybotech 4 X 3 Manipulator / 6 Travel
Car, Cybotech RC-6 Controller, Cold Wire Feeder, Miller Syncrowave 300
w/ SP-4 Pulser. System Offers 9 Axis of Powered Movement. Good
Condition
1 ea WS605014P Cybotech Automatic Manipulator / Positioner Tig
Welding System. System Includes A Fabspec Model 1840 2,000
lb Positioner, a 6 Axis Cybotech 4 X 3 Manipulator / 6 Travel
Car, Cybotech RC-6 Controller, Cold Wire Feeder, Cybotech EPU Power
Supply. System Offers 9 Axis of Powered Movement. Good Condition
Robot
Indexing Tables
1 ea RP612017 Preston-Eastin Model RHSDS-5 Dual
Sided Robotic Headstock/Tailstock. Dual sided for loading /
unloading on one side while welding on the other. Shot pins for
precise positioning. 500 lb balanced load capacity on each side. 6
length capacity. 24 diameter capacity. Dual Allen-Bradley SLC-150
controls, one for each of the headstock/tailstocks. Serial #RHDS-5-6 Good
Condition As-Is Only
1 ea RP612018 Preston-Eastin Model RHSDS-5 Dual
Sided Robotic Headstock/Tailstock. Dual sided for loading /
unloading on one side while welding on the other. Shot pins for
precise positioning. 500 lb balanced load capacity on each side. 6
length capacity. 24 diameter capacity. Dual Allen-Bradley SLC-150
controls, one for each of the headstock/tailstocks. Serial #RHDS-5-10 Good
Condition As-Is Only
1 ea RP004002 ABB/Esab Orbit 160B, Robotic
Positioner. Two Station Articulating Positioner, for Load &
Weld Station. 353 lbs Each Side, Table Rotation 90 Deg. in 2.7 Sec. Or
360 Deg. in 6.8 Sec., Tilting Arm: Turning Speed 0 to 11.8 RPM,
Indexing 90 Deg. 2.7 Sec., 360 Deg. 7.2 Sec., Station Interchange 3.5
Sec. This unit was integrated to ABB/Esab a IRB 6L2 Robot. Pos.
Ser.#414 441 9034, Cont. 443 440 9005
1 ea RP307001 Aronson Ride-5, Double Ended Tilt
and Rotate Robotic Indexing Positioner. This Two-Station
Tilt/Rotate Positioner has a Capacity of 500 lbs per Table @ 6"
C.G. Tilt and 3" C.G. Rotation. 180 Degree Sweep in 7 Seconds
with .0001 Repeatability. Two 18" Diameter Tables with Slots. 8
Non-Adjustable Index Stops for the Table Rotational Axis. 4
Non-Adjust6able Index Stops for the Tilt Axis. Can be Connected to any
Robot with Compatible I/O. This is an Indexing Type System, Not Servo.
Serial #843 Good Condition
1 ea RP210003P Koike-Aronson RHS10/T2.5-30SD
Robotic "Skyhook" Positioner. 2500 lb Load Capacity.
Center of Gravity 28". Overhang 3". Off-Center 38"
Table. Backlash Control and "Zero" Indicator on Control.
"Skyhook" Positioners Provide Part Rotation in Two 360
Degree Axis which Result in Partial or Full Inverting of the Workpiece.
Serial #869 Very Good Condition
1ea RP207001 Preston-Eastin Model
DEPA-30FBRobotic Positioner. . Two Station Articulating
Positioner, for Load & Weld Station. 3,000 lb Capacity @ 6"
C.G. Each Side. Fixed Table Height of 48" with the Table Flat.
43" x 43" Square Work Tables. Servo Drive that can be
Installed on any Robotic System with the Proper Relays.
"1996" Serial #DEPA-30FB-187 Priced As-Is !! Ready to
Install Your Servo Motors and Controls !! Very Good Condition
1 ea RP809023 Aronson RDE-RHS10/T3-42SD Double
Ended Robotic Skyhook Positioner. A two station articulating
positioned for loading and weld station. Each side has a capacity of
3,000 lb @ 18 c.g., 12 off set tables from the center of the
horizontal rotational axis. 36 diameter round tables with 8.25
thru holes. Serial #882 AS-IS Only !
1 ea RP809024 Aronson RDE-RHS10/T3-42SD Double
Ended Robotic Skyhook Positioner. A two station articulating
positioned for loading and weld station. Each side has a capacity of
3,000 lb @ 18 c.g., 12 off set tables from the center of the
horizontal rotational axis. 36 diameter round tables with 8.25
thru holes. Serial #881 AS-IS Only !
1 ea RP309001P Koike-Aronson 1994 Model #RDCG/T6-100/26SD
Drop-Center Positioner. Tilt Capacity of 6600 lbs @ 24
from the table, or 4000 lbs @ 57, or 2000 lbs @ 90!!.
Rotation Capacity of 6600 lbs @ 20 Center of Gravity off of
the centerline of rotation. Inside Distance Between Upright Sides is
101-3/4 Both Tilt and Rotation Axis have AdjustableAnti-Backlash
Dual Pinions on Bull Gears! Both Axis are Servo Drive Variable
Speed with Encoders and Resolvers. 360 deg. Rotation @ 0.0-2.0 RPM,
200 deg. Tilt @ 0.0-1.75 RPM. (This Servo Drive Positioner can be
converted to a Manual Pendant Operated Machine). Table is 48 x
48 with Hydraulic Master Clamping System for Slave Pallet
Mounted Tooling 1 ea. slave included . Note; Drop Center
Positioners are typically used for work pieces with longer Center
of Gravity distances from the table, resulting in lower working or
welding heights than using higher capacity positioners. This 1994
Machine has NEVER BEEN USED! Brand New Condition!
1 ea. M404001 Precision 9 x 9 x
27-1/2 Heavy Duty Manipulator/Travel Car System. This system
was manufactured for the Robotics Industry for precision welding on
military vehicles. Heavy Duty Mast has 9 ft. of constant speed of
precision screw driven lift starting at approx. 36 from the floor
to 144 high under the boom. The mast has manual rotation with lock.
Boom has 9 ft. of Dual Pinion variable speed gear drive and
rolls on Thompson Roundway roller system. Weight capacity approx. 750
lb. Travel car is 5 x 5 x 19 High and Variable Speed Rack
& Pinion Drive on 33 ft. of Thompson Roundway Precision Track. All
three (3)-axis paths are accordion booted. This system is now Servo
driven. We will change to Pendant AC-Inverter or D.C. Drives. Very
Good Condition
AUTOMATION
ACCESSORIES
Any PAN 61P NEW Pandjiris Model 61-P owered
Cross Slides. 200 lb Capacity @ 6 C.G., 6 Stroke. Motorized
constant speed travel. Joystick control. Priced Per Pair. NEW IN
STOCK!!
Any CYC ST200 5X5U Cyclomatic 5 x 5
Reconditioned Seam Tracker. 200 lb capacity. System includes a
standard control unit, 5 vertical and 5 horizontal slides,
mechanical seam sensor with 4 sensor cable, torch clamp bracket and
pendant control. Good Condition Current List Price on a Comparable
Unit
Any CYC AVC3U Cyclomatic Reconditioned Automatic
Arc Length Control System. Automatically maintains precise arc
length by controlling arc voltage to within 0.1 volts. 6 standard
stroke length. System includes control, slide and cables. Good
Condition Current List Price on a Comparable Unit
Any CYC 80AU Cyclomatic Reconditioned Magnetic
Arc Oscillator System. 0 50 oscillations per second. Provides
even heat distribution, prevents undercutting, eliminates excessive
porosity, ensures penetration and evens out weld puddle by creating a
magnetic field around the arc to precisely position, oscillate and
stabilize it. System includes controller, probe and cables. Good
Condition
Any JET ALC 101 V6TU Jetline Reconditioned
Automatic Arc Length Control System. Automatically maintains
precise arc length by controlling arc voltage to within 0.1 volts.
6 standard stroke length. Also provides the circuitry to integrate
the sequencing of the power supply start and stop functions and the
starting and stoping of two additional functions. System includes
control, slide and cables. Good Condition
Any JET CWF 10AU Jetline Reconditioned Cold Wire
Feeder. .020 to .093 wire diameter capacity. 3 to 150 IPM wire
speed feed range. 10 turn dial for precise wire speed setting. Forward
and reverse manual jog. Adjustable wire retract at the end of the feed
cycle. Good Condition
